Shijiazhuang slurry pump manufacturer: How to repair horizontal slurry pump

Slurry pumps need to be inspected and maintained regularly at the use site, so where should you start when doing inspections? Don’t worry, today we will talk about the slurry pump maintenance project.
When doing maintenance, we have to check whether it is a major inspection or a minor inspection. If it is a minor inspection, it is simpler. For example, check whether the packing at the shaft seal should be replaced; check whether the cooling water flow rate and pressure are normal. . Check whether the lubrication system needs to be refueled; check whether the coupling between the motor and the slurry pump is aligned; check whether there is leakage at the shaft seal and whether the leakage amount is normal.
Items that need to be inspected during overhaul: In addition to the above items that need to be inspected during minor repair, other items are also required: whether the mechanical seal is working properly; disassemble the pump to check the wear and corrosion of various accessories; check and clean bearings, oil seals, etc.; measure and adjust the bearing oil seal Clearance; check and measure the runout and clearance of each part of the rotor, and do a dynamic balance inspection when necessary; check and correct the straightness of the positive axis; check the misalignment of the pump body, foundation, anchor bolts and inlet and outlet flanges to prevent Additional stress is applied to the pump body, and the pipeline must be re-piped if necessary.
If you want to know more about slurry pumps, please feel free to call us!
www.panstopump.com, laurashi@panstopump.com, 0086-15732149758