How to install a gravel pump on a sand pumping ship

The gravel pump is also a type of centrifugal slurry pump. Because of its wide flow channel and good passing performance, it is often used in the sand pumping and sand making industry. When pumping sand, the gravel pump is usually installed on the sand pumping vessel. So how to install our gravel pump on a sand pumping ship. Today Shijiazhuang Shipump will take you to learn more about it.
1. Install the gravel pump in the ship's cabin. In this case, a diesel engine is generally used instead of a motor to drive the pump. The boat is usually equipped with a high-pressure clean Pansto Pump to wash up the sand at the bottom of the river. The inlet pipe of the gravel pump is generally a hose with a steel frame, so that it is not easy to collapse the pipe when pumping sand, or a section of PE pipe is connected to the front end of the hose, which will prevent the inlet pipe from being collapsed. The advantage of this installation is that it can be moved with the ship at any time.
2. There is another type that is installed on the river table, but this kind of installation requires the pump to be primed first, because our gravel pump does not have a suction function. Or add a vacuum tank, which can form a backflow so that the pump can operate normally.
If you want to know more about gravel pump installation, contact us!
www.panstopump.com, laurashi@panstopump.com, 0086-15732149758